LoRaWAN and M-Bus sensor technology
Indoor Sensor LoRaWAN
The sensors are used to measure the indoor climate, measuring temperature and humidity.
Depending on the sensor variant, the CO2 content, brightness, movements and room occupancy can also be recorded. The optical visualization takes place via the traffic light colors green, yellow and red.
Depending on the sensor variant, the CO2 content, brightness, movements and room occupancy can also be recorded. The optical visualization takes place via the traffic light colors green, yellow and red.
Outdoor temperature sensor LoRaWAN
The waterproof LoRaWAN outdoor temperature sensor is used to measure the ambient temperature. It measures temperatures from -55 °C to 125 °C with an accuracy of ±0.5 °C. The moisture-resistant and rustproof sensor is suitable for continuous use.
LoRaWAN pulse counter
The LoRaWAN pulse counter is used to measure analog or digital signals. It is used, for example, to record pulses from electricity meters or to record analog sensors.
Thanks to its waterproof and dustproof housing, it is ideal for outdoor use.
Thanks to its waterproof and dustproof housing, it is ideal for outdoor use.
I/O Controller LoRaWAN
The LoRaWAN I/O controller is a module with a long range. It can be parameterized for various I/O interfaces such as digital inputs and outputs, analogue current and voltage inputs and relay outputs.
Opto head KLAX LoRaWAN
The KLAX optical head is used to read electricity meters via LoRaWAN. For this purpose, the KLAX is attached to the integrated optical interface of modern metering devices using a magnet.
The optical head receives the signals via an infrared interface and transmits them via LoRaWAN.
The optical head receives the signals via an infrared interface and transmits them via LoRaWAN.
Door Window Contact LoRaWAN
The LoRaWAN sensor for indoor use measures the number of openings of doors or windows.
It also indicates the status (open or closed).
It also indicates the status (open or closed).
Meter module BMH3603 LoRaWAN
The plug-in card is used to transmit meter data via LoRaWAN. It can be operated with heat or cooling meters BMH 3603 or BMC 3603. The simple installation of the meter module enables quick conversion to LoRaWAN technology.
Flow sensor FD-H Clamp-on sensor
The FD-H clamp-on flow sensor measures the flow rate and temperature of almost all liquids (water, highly viscous liquids, chemicals, etc.) in metal and plastic pipes. It can be installed quickly and easily during operation without interrupting production and is therefore also suitable for temporary measurements. As an option, the clamp-on flow sensor can also be used to measure heat quantities using two temperature sensors.
Flow sensor FD-R Clamp-on sensor
The FD-R flow sensor, designed for indoor and outdoor use, is suitable for monitoring water, oils, chemicals and high-pressure liquids at temperatures of -20°C and +120°C. As an option, the clamp-on flow sensor can also be used to measure heat quantities using two temperature sensors.
Indoor temperature-humidity sensor M-Bus
Measuring temperature and humidity is the basis for improving energy efficiency and the indoor climate. The temperature and humidity sensor enables the direct recording of indoor temperature and humidity via the M-Bus.
Outdoor temperature-humidity sensor M-Bus
Measuring temperature and humidity is the basis for improving energy efficiency and the indoor climate. The temperature and humidity sensor enables the direct recording of outdoor temperature and humidity via the M-Bus.
Converter RS485 to LoRaWAN
The RS485 to LoRaWAN converter converts the RS485 signal into a LoRaWAN radio signal. The converter can be used, for example, to connect energy meters with Modbus RTU output in order to realize remote reading at remote locations.